Error Messages - Integra DTR-6.9 Instruction Manual

First Time Setup—Continued

Error Messages

While the automatic speaker setup is in progress, one of
the following error messages may appear:
❏ Ambient noise is too high.
Auto Speaker Setup
Ambient noise is too high.
Retry
Cancel
This message appears if the background noise is too
loud and the measurements cannot be performed
properly.
Remove the source of the noise and try again.
Retry: Return to the measured point immediately
before and start set up again.
Cancel: Cancel the automatic speaker setup.
❏ Speaker Detect Error
This message appears if a speaker is not detected. "Yes"
means that a speaker was detected. "No" means that no
speaker was detected.
Auto Speaker Setup
Speaker Detect Error
FL : Yes
SL : ---
SBL : ---
C : Yes
Retry
Cancel
One of the front speakers has not been detected.
Auto Speaker Setup
Speaker Detect Error
FL : Yes
SL : ---
SBL : ---
C : Yes
Retry
Cancel
One of the surround speakers has not been detected.
Auto Speaker Setup
Speaker Detect Error
FL : Yes
SL : ---
SBL : ---
C : Yes
Retry
Cancel
The surround back speakers have been detected but
the surround speakers haven't.
FR : No
SR : ---
SBR : ---
SW : ---
FR : Yes
SR : No
SBR : ---
SW : ---
FR : Yes
SR : No
SBR : Yes
SW : ---
Auto Speaker Setup
Speaker Detect Error
FL : Yes
SL : ---
SBL : No
C : Yes
Retry
Cancel
The right surround back speaker has been detected
but the left surround back speaker hasn't.
Auto Speaker Setup
Speaker Detect Error
FL : Error
SL : Yes
SBL : Yes
C : Yes
Retry
Cancel
The speaker type detected does not match what was
expected. The speaker may be or incorrect type or
broken. Please check that it is the correct speaker
type, or that all drivers are working.
Auto Speaker Setup
Speaker Detect Error
Retry
Cancel
The number of speakers detected on the second or
third measurement was different to the number
detected on the first measurement.
Make sure speakers that cannot be detected are con-
nected property.
Retry: Return to step 2 and try again.
Cancel: Cancel the automatic speaker setup.
❏ Writing Error!
Auto Speaker Setup
Writing Error!
Retry
Cancel
This message appears if saving fails.
Try saving again. If this message appears after 2 or 3
attempts, the AV receiver is probably malfunctioning.
Contact the dealer.
Retry: Return to step 2 and try again.
Cancel: Cancel the automatic speaker setup.
FR : Yes
SR : Yes
SBR : Yes
SW : ---
FR : Yes
SR : Yes
SBR : Yes
SW : Yes
51