Steam Cleaning Hard Floors - Vax VSTDUO1600 User Manual

Operation

Steam cleaning hard floors

WARNING: Never leave the stick steamer in one spot on any surface for an extended period of time as this
may damage the floor surface. Place on the resting tray whilst the steam is heating and when the product
is not moving continuously on the floor.
WARNING: Your stick steamer should only be used on tiles, lino or sealed wood flooring. Do not use on
laminated flooring and if using the product on floating floor boards – check with the manufacturer of this
flooring before use if it is suitable.
WARNING: Never use the steam stick without the microfibre cleaning pad properly attached to the
floor head.
WARNING: To reduce the risk of personal injury, unplug the steamer when assembling the accessories.
IMPORTANT: Check the water tank viewing window to ensure there is adequate water in the water tank.
IMPORTANT: Do not put solutions or detergents into the water tank. This machine operates with water
& steam only.
1. Plug into mains and switch power button 'on' at the back of the handheld. Steam takes approx. 30 seconds.
To recline the unit place
foot on oor head and
tilt handle.
7
To produce steam squeeze
the trigger. A hissing noise
will be heard as the steam
begins. Steam will wet the
micro bre cleaning pad.
Move the steam stick
slowly backwards and
forwards across the oor
paying particular attention
to high tra c areas.
Vax Service line:
AU: 1300 361 505
NZ: 0800 800 900