How To Use; Steam Cleaning Hard Floors - Vax Home Pro User Manual

How To Use

Steam cleaning hard floors

WARNING: Never leave the steam cleaner floor head in one spot on any surface for an extended period
of time with a damp or wet pad attached as this may damage the floor surface. Your steam cleaner should
only be used on sealed floors including tiles, lino, wood flooring and laminate.
WARNING: This steam mop may not be suitable for all floating floorboard - please check with your floor
manufacturer first prior to use.
IMPORTANT: Please refer to the floor manufacturer's care recommendations before use and test steam
mop on a discrete area of flooring to begin with.
WARNING: To reduce the risk of personal injury, unplug the steam cleaner when assembling the accessories.
Do not operate the steam cleaner without water in the clean water tank.
Plug into mains, turn on and
press power button on.
After approximately 12 minutes
the Green LED will illuminate
showing steamer is ready to use.
vax.com.au
Ensure steam handle safety latch
is on.
Release steam handle safety latch.
Orange LED will illuminate when
water is heating.
To produce steam, squeeze the
trigger in short bursts. To prevent
overly wetting floors, do not hold
down continuously.
8