NOTE: If the supply cord is damaged, it must be replaced by the manufacturer, a Vax service agent or NOTE: It is advisable to use distilled water to prevent similarly qualified persons in order to avoid hazard.
Page 5
Vax V-082 D7 JN 4/29/05 1:55 PM Page 5 How to Operate NOTE: Always test the steam cleaner first on an 2. When the “steam ready” indicator comes on, the inconspicuous area of the surfaces or fabrics to be steam cleaner is ready to use (Fig.3/4). The cleaned to check their tolerance to hot steam.
Ensure that the nozzle clicks into place on assembly. The floor nozzle may be used with or without the cleaning cloth. However, Vax recommend using the cloth to protect coverings in the case of sensitive surfaces such as wood or linoleum.
(Fig.4/4). abrasives or alcohol since they may damage the housing. Vax recommend that the tank be rinsed out after 5 filling operations at the latest if water hardness is above 1.8 mmol/l (10˚dH). Information regarding local water hardness may be obtained from the water or utility company.
Page 8
Vax V-082 D7 JN 4/29/05 1:55 PM Page 8 Storage 6. Storage 1. Switch the steam cleaner off. Press the steam button on the steam gun to release the remaining pressure. 2. Remove the mains plug from the socket and allow the steam cleaner to cool down.
Solution: Check the socket by unplugging the steam cleaner and plugging in a different appliance. Cause: The power cable is damaged. Solution: Have the cable replaced by a Vax Service Agent. PROBLEM: No steam is emitted when the steam button is pressed.
Page 10
Vax V-082 D7 JN 4/29/05 1:55 PM Page 10 This page has been left intentionally blank.
Page 11
Vax V-082 D7 JN 4/29/05 1:55 PM Page 11 This page has been left intentionally blank.
Page 12
1:55 PM Page 12 EEC STATEMENT OF COMPLIANCE Manufacturer/EEC importer: Vax Limited, hereby on our own responsibility, declare that the product V-082 Steam Cleaner is manufactured in compliance with the following: Safety: 73/23/EEC Low Voltage Directive, as modified by 93/68/EEC EMC: 89/336/EEC Electromagnetic Compatibility Directive, as modified by 93/68/EEC Waste electrical products should not be disposed of with household waste.