Table of Contents
Advertisement
Image menu: The following setting allows you to adjust the imge.
Display
A udio
Keystone
Use this option to keep the image square as the angle of projection is
changed. To adjust the keystone, highlight Keystone, and then click the right
navigation button. This option is available for computer sources only in XGA
1024 x 768 resolution only.
Overscan
Use this to crop all the edges of the image to remove noise that is generated
on the edges by your source. This option is available for video sources only.
Note: Some screen savers interfere with the operation of Auto Image. If you
are experiencing problems, try turning your screen saver off, and then
turning Auto Image off and on again.
Auto Image
The projector automatically adjusts tracking, signal synchronization, and
vertical and horizontal position for most computers (Auto Image does not
apply to video sources). If you want to adjust these features manually, you
must turn off AutoImagefirst by highlighting Auto Image in the Image menu
and clicking the left or right navigation button to select off.
Resize
This option works differently for computer and video sources. For computer
sources, the Resize option automatically resizes the image by scaling it up or
down. It affects computer images that are not in the projector native
resolution. When Resize option is on, the projector makes the best fit of the
image to the computer screen. If you turn the Resize option off (by
highlighting it in the Image menu and clicking the left or right navigation
button to select off), the image might be either cropped or too small for the
Image
C ontrols
>
>
Keystone
Overscan
A uto image
Resize
Manual sync
Manual tracking
Horizontal position
Vertical position
Language
Status
on
on
on
Installation and user's guide
19
Advertisement
Table of Contents
