Table of Contents
Advertisement
16.2 The UPnP Screen
Use the following screen to configure the UPnP settings on your P-660H-T1v3s.
Click Advanced > UPnP to display the screen shown next.
See
Section 16.1 on page 161
Figure 68 Advanced > UPnP > General
The following table describes the fields in this screen.
Table 50 Advanced > UPnP > General
LABEL
Active the Universal Plug
and Play (UPnP) Feature
Allow users to make
configuration changes
through UPnP
Apply
Cancel
P-660H-T1v3s User's Guide
Chapter 16 Universal Plug-and-Play (UPnP)
for more information.
DESCRIPTION
Select this check box to activate UPnP. Be aware that anyone
could use a UPnP application to open the web configurator's
login screen without entering the P-660H-T1v3s's IP address
(although you must still enter the password to access the web
configurator).
Select this check box to allow UPnP-enabled applications to
automatically configure the P-660H-T1v3s so that they can
communicate through the P-660H-T1v3s, for example by
using NAT traversal, UPnP applications automatically reserve a
NAT forwarding port in order to communicate with another
UPnP enabled device; this eliminates the need to manually
configure port forwarding for the UPnP enabled application.
Click this to save your changes.
Click this to restore your previously saved settings.
163
Advertisement
Table of Contents
