The Address Mapping Screen - ZyXEL Communications P-660H-T1 v3s User Manual

Chapter 8 Network Address Translation (NAT)
Table 24 Network > NAT > Port Forwarding: Edit (continued)
LABEL
Apply
Cancel

8.4 The Address Mapping Screen

Note: The Address Mapping screen is available only when you select Full Feature
in the NAT > General screen.
Ordering your rules is important because the P-660H-T1v3s applies the rules in
the order that you specify. When a rule matches the current packet, the P-660H-
T1v3s takes the corresponding action and the remaining rules are ignored. If there
are any empty rules before your new configured rule, your configured rule will be
pushed up by that number of empty rules. For example, if you have already
configured rules 1 to 6 in your current set and now you configure rule number 9.
In the set summary screen, the new rule will be rule 7, not 9. Now if you delete
rule 4, rules 5 to 7 will be pushed up by 1 rule, so old rules 5, 6 and 7 become new
rules 4, 5 and 6.
To change your P-660H-T1v3s's address mapping settings, click Network > NAT
> Address Mapping to open the following screen.
Figure 40 Network > NAT > Address Mapping
112
DESCRIPTION
Click this to save your changes.
Click this to restore your previously saved settings.
P-660H-T1v3s User's Guide