Chapter 4 Tutorials
4.8.1 Configuring Multiple PVCs and ATM-QoS
This section shows you how to configure two PVCs and specify a proper ATM-QoS
type for each PVC.
Click Network > WAN > Internet Access Setup, configure the settings you
1
(ISP) want to provide to the subscriber for general data transmission. This tutorial
uses the following example settings:
• ADSL Mode: Auto Sync-Up
• Mode: Routing
• Encapsulation: PPPoE
• User Name: PPPoEuser1
• Password: 1234
• Multiplex: LLC
• VPI: 0
• VPC: 35
Leave the other settings as their defaults and click Apply.
54
P-660H-T1v3s User's Guide