ZyXEL Communications P-660H-T1 v3s User Manual page 227

Select Ethernet built-in from the Connect via list.
2
Figure 108 Macintosh OS 8/9: TCP/IP
For dynamically assigned settings, select Using DHCP Server from the
3
Configure: list.
For statically assigned settings, do the following:
4
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your P-660H-T1v3s in the Router address box.
Close the TCP/IP Control Panel.
5
Click Save if prompted, to save changes to your configuration.
6
Turn on your P-660H-T1v3s and restart your computer (if prompted).
7
Verifying Settings
Check your TCP/IP properties in the TCP/IP Control Panel window.
P-660H-T1v3s User's Guide
Appendix A Setting up Your Computer's IP Address
227