Connecting The Pg-5F Extension Cable - Kenwood TM-D710GA Instruction Manual

CONNECTING THE PG-5F EXTENSION CABLE

Using two PG-5F kits, you can extend the cables to the maximum length.
(Components marked with an asterisk * are included in the PG-5F kit.)
■ Connecting Using a Single Extension Kit
Microphone
* Extension
connector
Operation panel
■ Connecting Using Two Extension Kits
Microphone
Operation panel
■ Installing the Line Filter
Install the line fi lter approximately
3 cm from the connector which
attaches to the TX/RX unit.
Approx. 3 cm
40
External speakers
Speaker cables (4 m)
* Modular cable (4 m)
* Extension
connector
External speakers
Speaker cables (4 m)
Modular cable (4 m) &
extension connector (2 sets)
Modular cable (4 m) &
extension connector (2 sets)
* Line fi lter
* Modular cable (4 m)
■ Affi xing the Microphone Cable
Lock the microphone cable down
as shown in the illustration.
Self-tapping screw
Flat washer
* DC power cables (6 m)
TX/RX unit
* Line fi lter
DC power cables (6 m)
TX/RX unit
Microphone
cable
Cable holder
Cushion