Basic Mode: Encoder - Bosch VIP-X1XF Installation And Operating Manual

30 en | Configuration using a Web browser
5.6

Basic Mode: Encoder

Non-recording profile
You can select a profile for encoding the video signal.
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field. Below is a brief description of the
factory default settings for the encoder profiles.
NOTICE!
The names and the technical details for the encoder profiles depend on the configuration of
the device.
–
–
–
–
–
–
–
–
DOC | V4.54 | 2011.09
High resolution 1
High quality for connections with the highest bandwidth, resolution 704 × 576/480 pixels
High resolution 2
High quality for high bandwidth connections, resolution 704 × 576/480 pixels
Low bandwidth
High resolution for low bandwidth connections, resolution 704 × 576/480 pixels
DSL
For DSL connections with 500 kbps, resolution 704 × 576/480 pixels
ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
MODEM
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
GSM
For GSM connections at 9,600 baud, resolution 352 × 288/240 pixels
Installation and Operating Manual
VIP X1 XF
Bosch Sicherheitssysteme GmbH