Plotting Over Time Or Distance; Viewing Pressure Plots; Adjusting The Zoom Ranges - Garmin 76CS Plus Owner's Manual

The profile, located in the center of the page, displays
elevation changes. You can change the profile display
to show pressure changes. The bottom of the page
displays the current elevation and your current rate of
ascent or descent when moving. It can also display the
ambient pressure and time of measurement.
Data
fields
Current
Status
Altimeter Page showing the Pressure Plot

Plotting Over Time or Distance

By default, the Altimeter displays the changes in el-
evation over distance. You can view the changes in el-
evation over time: press MENU, highlight View Over
Time, and press ENTER.
76CS Plus Owner's Manual
190-00507-00_0A.indd 63

Viewing Pressure Plots

You can display changes in barometric pressure over
time: press MENU, highlight View Pressure Plot,
and press ENTER.
After you have displayed the pressure plot, you can
then view the ambient pressure or the barometer. You
can only view the elevation plot over distance; you
cannot view the pressure plot over distance.

Adjusting the Zoom Ranges

You can adjust the scale of the plot (zoom range).
Profile
To adjust the graph's scale:
Plot
1. Display the desired plot and press the Rocker
key Up or Down to open the Zoom Ranges
sliders.
2. Press the Rocker key Up or Down to adjust
the vertical distance or pressure and Left or
Right to adjust either the time or distance.
3. Press ENTER to return to the plot. The plot is
redrawn with your specified zoom ranges.
A F > U
DDITIONAL EATURES SING THE
A
LTIMETER
63
2/14/2005 3:33:39 PM