Editing The Route Points; 76Cs Plus Owner's Manual - Garmin 76CS Plus Owner's Manual

Editing the Route Points

You can edit each point in your route using the route
point menu. From the Route Review page, highlight
the point in the route you want to edit and press EN-
TER. The route point menu, shown below, opens.
Review—opens the item's information page. Press
QUIT to return to the Route Review page.
Insert—opens the Find Menu so you can select a new
point to insert into the route. The new point is added
before the selected point in the route.
Remove—removes the highlighted point from the
route.
Change—opens the Find Menu so you can replace
the selected point with a different point.
Move—allows you to change the point's position in
the route. Press the Rocker key Up or Down to move
the point.

76CS Plus Owner's Manual

190-00507-00_0A.indd 35
B O > C
ASIC PERATION
You can also edit a route on the Map page.
To edit the route on the map:
1. Press MENU twice to open the Main Menu.
Use the Rocker key to select the Routes and
press ENTER.
2. Select the desired route and press ENTER.
Press MENU to open the Route Review page
menu.
3. Highlight Edit on Map and press ENTER.
4. Highlight the route and press ENTER.
5. Drag the route to the new location and press
ENTER.
6. If you select a location that is not a feature or
waypoint, a new waypoint is created. Press
ENTER on the New Waypoint page to save the
location as a waypoint. You must then highlight
the waypoint on the map and press ENTER to
add it to the route.
7. Repeat steps 4 through 6 until all desired
points are added to the route. Press Quit when
finished.
U R
REATING AND SING OUTES
35
2/14/2005 3:33:27 PM