The Timer Mode allows you to set or view several timing functions. You can set one or two timers as count
up or count down timers. You can view the Trip Time, Trip Distance, Flight Time, and Flight Distance. The
Trip Time and Trip Distance show the time and distance traveled since being reset. The Flight Time and Flight
Distance show the time and distance traveled since the Trigger Speed was reached. Enter the Trigger Speed to
set the threshold where the Flight timers start after the aircraft reaches the selected speed. Use the Large knob
to highlight the selection to change.
Timer 1 and Timer 2
Edit the Timer values by pressing in the CRSR knob, move the cursor with the Large knob, change the value
with the Small knob, and then press the Enter key. Press the 1 Min or 2 Min keys to instantly insert one or
two minutes as the time. Press the Disp key to display the Timer value on the Map pages. The Disp key will
be highlighted and an asterisk will appear next to the value that will be displayed on the Map pages. Press the
CLR key to reset the values to 0.
Trip Time and Distance
The Trip Time and Distance counters display the time and distance traveled since the last time they were
reset.
1. Turn the Large knob to highlight Trip Time.
2. Press the Disp key to display the Trip Timer value on the Map pages.
3. To clear the Trip Time and Trip Distance values, press the CLR key.
Timers (TMR)
Basic Operation
Timers
Timer Selections
103