Editing And Reordering Locations In A Route; Changing Routing Options For A Route; Navigating To A Saved Route; Editing And Saving Your Active Route - Garmin TREAD Owner's Manual

Editing and Reordering Locations in a Route

1 Select Apps > Navigation > Route Planner.
2 Select a saved route.
3 Select List.
4 Select a location.
5 Select an option:
• To change the location, select
• To move the location up or down, select
• To add a new location after the selected location, select
• To remove the location, select

Changing Routing Options for a Route

You can customize how the device calculates your route.
1 Select Apps > Navigation > Route Planner.
2 Select a saved route.
3 Select .
4 Select an option:
• To add shaping points to your route, select Shaping, and select at least one location.
• To change the calculation mode for the route, touch a route segment, and select a calculation mode.

Navigating to a Saved Route

1 Select Apps > Navigation > Route Planner.
2 Select a saved route.
3 Select Go!.
4 Select the first location to navigate to, and select OK.
5 Select Start.
The device calculates a route from your current location to the selected location, and then it guides you to
the remaining route destinations in order.

Editing and Saving Your Active Route

If a route is active, you can use the route planner to edit and save it.
1 Select Apps > Route Planner > My Active Route.
2 Edit your route using any of the route planner features.
The route recalculates each time you make a change.
3 Select Save to save your route, which you can navigate again later (optional).

TracBack

®

Following Your Recent Track

The TracBack feature records the most recent segment of your movement. You can retrace your recent track
back to a previous location.
1 Select Apps > Adventure > TracBack.
Your recent track appears on the map.
2 Select Go!.
18
, and enter a new location.
, and drag the location to a new position in the route.
.
.
Using the Apps