Speaker Setting; X'over Setting - Kenwood KDC-X8019BT Instruction Manual

3
Enter Speaker setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Pro Setup"
4
Select the setting item to adjust
Turn the [VOL] knob and press it when the
desired item is displayed.
5
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.

X'Over Setting

Fine adjusting the following setting values
corresponding to the X'Over values set in the
section <Speaker Setting> (page 38).
Display Item
"X'Over"
"Front" "FC"
"SLOPE"
"GAIN"
"Rear" "FC"
"SLOPE"
"GAIN"
"SubWoofer" "FC"
"SLOPE"
"GAIN"
"PHASE"
"Tweeter" "FC"
"TW
Volume"

"Speaker Setting".

Range
Front High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
Front High Pass Slope
-6, -12, -18, -24 dB/Oct
Front Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Rear High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
Rear High Pass Slope
-6, -12, -18, -24 dB/Oct
Rear Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Subwoofer Low Pass Filter
30, 40, 50, 60, 70, 80, 90, 100, 120,
150, 180, 220, 250, Through (Hz)
Subwoofer Slope
-6, -12, -18, -24 dB/Oct
Subwoofer Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Subwoofer Phase
Reverse (180°)/ Normal (0°)
Tweeter High Pass Filter
1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 (kHz)
Tweeter Volume
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
( : Factory setting)
When Speaker network is set to 3 way
Display Item
"X'Over"
"Tweeter" "FC"
"SLOPE"
"GAIN"
"PHASE"
"Mid HPF" "FC"
"SLOPE"
"GAIN"
"PHASE"
"Mid LPF" "FC"
"SLOPE"
"GAIN"
"PHASE"
"Woofer" "FC"
"SLOPE"
"GAIN"
"PHASE"
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter X'Over setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
>
Select "Pro Setup"
Range
Tweeter High Pass Filter
1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5 (kHz)
Tweeter Slope
-6, -12 dB/Oct
Tweeter Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Tweeter Phase
Reverse (180°)/ Normal (0°)
Mid Range High Pass Filter
Through, 30, 40, 50, 60, 70, 80, 90,
100, 120, 150, 180, 220, 250 (Hz)
Mid Range High Pass Slope
-6, -12 dB/Oct
Mid Range Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Mid Range Phase
Reverse (180°)/ Normal (0°)
Mid Range Low Pass Filter
1, 1.6, 2.5, 4, 5, 6.3, 8, 10, 12.5,
Through (kHz)
Mid Range Slope
-6, -12 dB/Oct
Mid Range Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Mid Range Phase
Reverse (180°)/ Normal (0°)
Woofer Low Pass Filter
30, 40, 50, 60, 70, 80, 90, 100, 120,
150, 180, 220, 250, Through (Hz)
Woofer Low Pass Slope
-6, -12 dB/Oct
Woofer Gain
0, -1, -2, -3, -4, -5, -6, -7, -8 dB
Woofer Phase
Reverse (180°)/ Normal (0°)
( : Factory setting)
"X'Over".
Next page 3
English |
39