Theft Deterrent Faceplate; Demonstration Mode Setting - Kenwood KDC-X8019BT Instruction Manual

Clock and Other Functions

Demonstration mode Setting

Turning the demonstration mode ON/OFF.
1
Enter Menu List mode
Press the [MENU] button.
2
Enter Demonstration mode setting
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "DEMO Mode".
3
Set the Demonstration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "ON" or "OFF".
4
Exit Menu List mode
Press the [MENU] button.
34
|
KDC-X8019BT/ KDC-X8019BTL

Theft Deterrent Faceplate

The faceplate of the unit can be detached and
taken with you, helping to deter theft.
Removing the Faceplate
1
Press the Release button.
Drop open the faceplate.
2
Drawing the faceplate to left side pull it to
forward and remove it.
¤
• The faceplate is a precision piece of equipment and can
be damaged by shocks or jolts.
• Keep the faceplate in its faceplate case while detached.
• Do not expose the faceplate (and the faceplate case) to
direct sunlight or excessive heat or humidity. Also avoid
places with too much dust or the possibility of water
splashing.
Reattaching the Faceplate
3
Align the shaft on the unit with the depression
on the faceplate.
4
Push the faceplate in until it clicks.
The faceplate is locked in place, allowing you to
use the unit.