Speaker Setting - Kenwood KDC-719 Instruction Manual

El
General features
Increasing Volume
Press the [A] bttton.
c
Decreasing Volume
Press the [VI button.
1
Turning the volume down quickly.
Press the [ATT] button.
Each time the button is pressed the Attenuator turns ON or OFF.
When it's ON, the "ATT" indicator blinks.
Compensating for low and high tones during low volume.
Press the [LOUD] button for at least 1 second.
Each time the button is pressed for at least 1 second the
Loudness turns ON or OFF.
When it's ON, "LOUD" indicator is ON.
You can recall the best sound setting preset for different types of
the music.
1 Select the source to set
Press the [SRCI button.
2 Select the Sound type
Press the [Ql button.
""Each time the button is pressed the sound settrng switches.
Sound setting Display
Flat "FLAT"
User memory
"User Preset"
Rock "ROCK"
Pops "POPS"
Easy
Top 40
"EASY"
"TOP 40"
l
User memory. The values set on the <Audio control> (page IO)
l
Each setting value is changed on the <Speaker &Woofer Settrng>
(page 12) or <Speaker Setting> (page 11). Frrst, select the Speaker
and Woofer type wrth the <Speaker &Woofer Setting> or
<Speaker Setting>.
1
Select the source for adjustment
Press the KSRCl button.
2 Enter Audio Control mode
Press the [AUDI button for at least 1 second.
3 Select the Audio item for adjustment
Press the [FM1 or [AM] button.
Each time the button is pressed the items that can be adjusted
switch as shown below.
4 Adjust the Audio item
Press the f-1 or [WI button.
-lO-