Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Kenwood KDC-BT30
Summary of Contents for Kenwood KDC-BT30
-
Page 1: Instruction Manual
CD-RECEIVER KDC-BT40U KDC-BT30 INSTRUCTION MANUAL © B64-4535-00/00 (EW/E0) -
Page 2: Table Of Contents
Display of Phone Number Type (Category) Audio Adjustments Audio Control Display Settings Display Selection Text Scroll Display Setting Auxiliary Input Display Setting KDC-BT40U/KDC-BT30 Other Functions Clock Adjustment Demonstration Mode Setting Initial Setting Removing the Faceplate How to Reset Your Unit Bluetooth Setup... -
Page 3: Before Use
• If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters which can be displayed by this unit are A-Z 0-9 @ “... -
Page 4: Component Names And Functions
9 [VOICE] button To make a voice dialing call. To change text scroll. (press the button at least 1 second) KDC-BT40U/KDC-BT30 p [4] / [¢] button To select a station, song and setting items. q Microphone The microphone for the hands free phone is built in. -
Page 5: General Operation
In this manual, the above selection is indicated as Select “AUDIO CONTROL” (“AUDIO CTRL”) > “DETAILED SET” (“DETAIL SET”) (“ ”) encloses a display appearing on the KDC-BT30. It is shown only if it differs from the one appearing on the KDC-BT40U. Make a setting Turn the [VOL] knob to select a setting value, and then press the [VOL] knob. -
Page 6: Music Disc/Audio File/Ipod Operation
USB Remove mode (“USB REMOVE” is displayed) and the USB device, iPod can be removed safely. Selecting CD, USB or iPod source Press the [SRC] button. Select the “CD”/“USB” or “iPod” display. KDC-BT40U/KDC-BT30 Disc slot — USB Terminal Play function Scan play Press the [2] button. -
Page 7: All Random
Items Playlists Artists Albums Songs ] button for at least 1 second. the database created with KENWOOD Music Editor. ] button. Operation Turn the [VOL] knob. Press the [4] or [¢] button. Press the [VOL] knob. Press the [ ] button. -
Page 8: Music Search
Playlist. Registering Songs in the Playlist Play the song you want to register Press the [BAND], [4], and [¢] button. KDC-BT40U/KDC-BT30 You can select the song to play by referring to <Music Search for iPod> (page 7). Register the song Press the [5] button for at least 2 seconds. -
Page 9: Audio File/ Ipod Setting
The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected. (iPod and KENWOOD Music Editor File only) 0.5%/1%/5%/10% “MPLIST DELETE” Deletes the saved My Playlist. <My Playlist for iPod>(page 8) (iPod only) -
Page 10: Tuner Operation
• Up to 6 stations with a different band (FM/AM) can be memorized to the [1] – [6] button according to the setting of “PRESET TYPE” of <Initial Setting> (page 18). KDC-BT40U/KDC-BT30 Tuner Setting You can select following Tuner Setting items. -
Page 11: Pty (Program Type)
Make a setting Turn the [VOL] knob and press it when the desired item is displayed. When select “AUTO MEMORY”: Turn the [VOL] knob to select “YES”, and then press the [VOL] knob. When 6 stations that can be received are put in the memory, auto memory entry closes. -
Page 12: Operation Of Hands-Free Phoning
Start registering this unit by operating the Bluetooth device By operating the Bluetooth device, register the hands-free unit (pairing). Select “KENWOOD BT CD/R-3P1” from the list of connected units. Enter a PIN code Input the PIN code (“0000”) in the Bluetooth device. -
Page 13: Calling A Number In The Call Log
Select the name Operation type Operation Move to the next phone Turn the [VOL] knob. number. Move to the next name. Press the [4] or [¢] button. Make a call Press the [VOL] knob. ⁄ • To use the Phone Book, it must be downloaded to this unit in advance. -
Page 14: Speed Dialing (Preset Dial)
Operate your cell-phone to return to the hands-free talk mode. Adjusting the Voice Volume during a Call Turn the [VOL] knob. KDC-BT40U/KDC-BT30 Call Waiting Answering Another Incoming Call with the Current Call Suspended Press the [VOL] knob. -
Page 15: Audio Adjustments
Audio Adjustments [SRC] [VOL] Audio Control You can adjust following Audio Control items. Select the source Press the [SRC] button. Select the “TUNER”/“USB” or “iPod”/ “CD”/“AUX” display. Enter Function Setting mode Press the [VOL] knob for at least 1 second. “FUNCTION”... -
Page 16: Display Settings
Play time & Music number Clock In CD source Information Disc title Track title Play time & Track number Clock KDC-BT40U/KDC-BT30 In Standby/ Auxiliary input source Information Source name Clock Exit Function Setting mode Press the [ ⁄ • When you select the clock display, the display setting of each source will be changed to the clock display. -
Page 17: Display Setting
Display Setting You can select following Display Setting items. Enter Function Setting mode Press the [VOL] knob for at least 1 second. “FUNCTION” is displayed. Select the function item Turn the [VOL] knob and press it when the desired item is displayed. >... -
Page 18: Other Functions
Exit Function Setting mode Press the [ ] button for at least 1 second. KDC-BT40U/KDC-BT30 Demonstration Mode Setting Turning the demonstration mode ON/OFF. Enter Function Setting mode Press the [VOL] knob for at least 1 second. -
Page 19: Removing The Faceplate
“F/W UP” Display the firmware version and update the firmware. MEDIA USB: Select a USB device. MEDIA CD: Select CD. (With the KDC-BT30, CD is selected.) For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/ (Factory setting: Underlined) -
Page 20: Bluetooth Setup
Specify the PIN code required when registering (“PIN EDIT”) this unit using the Bluetooth device. Refer to <Registering PIN Code> (page 22). KDC-BT40U/KDC-BT30 “AUTO ANSWER” This function automatically answers (responds to) a call after lapse of the preset time interval for automatic answer. -
Page 21: Registering Bluetooth Device (Pairing)
Registering Bluetooth Device (Pairing) To make your Bluetooth device (cell-phone) usable with this unit, you need to register it (pairing). You can register up to 5 Bluetooth devices to this unit. Registering from this unit Select Bluetooth device registration mode For how to select setup item, refer to <Bluetooth Setup>... -
Page 22: Registering Pin Code
] button for at least 1 second. ⁄ • For how to update the firmware, access our web site. http://www.kenwood.com/cs/ce/bt/ KDC-BT40U/KDC-BT30 Downloading the Phone Book Download the phone book data from the cell- phone to this unit so that you can use the Phone Book of this unit. -
Page 23: Selecting The Bluetooth Device You Wish To Connect
Selecting the Bluetooth Device You Wish to Connect When 2 or more Bluetooth devices have already been registered, you need to select the Bluetooth device you wish to use. Select Bluetooth device selection mode For how to select setup item, refer to <Bluetooth Setup>... -
Page 24: Bluetooth Setup
• The short message cannot be displayed during downloading the SMS. • Unread messages are prefixed with an asterisk (*). KDC-BT40U/KDC-BT30 Adding a Voice Dialing Command Add a voice tag to the phone book for voice dialing. You can register up to 35 voice tags. -
Page 25: Adding A Voice Dialing Command
⁄ • If your voice cannot be recognized, a message is displayed. Pressing the [VOL] knob allows you to retry voice input. (page 37) Select “PB NAME CHK” (Play) Press the [VOL] knob. Play the registered voice and return to step 3. Select “PB NAME DEL”... -
Page 26: Basic Operations Of Remote Control
[ENT] button In Tuner Source Band select [FM+]/[AM–] button Station select [4]/[¢] button Recall preset stations [1] — [6] button KDC-BT40U/KDC-BT30 In iPod/CD/Audio file Source Music select [4]/[¢] button Folder/Disc select Pause/Play [38] button Enter Music search mode Movement between folders/files in Music search mode [5]/[∞] button... - Page 27 Preparing the remote control unit Pull the battery sheet out from the remote control unit to the direction of the arrow. Changing the battery of the remote control unit Use a commercially available button battery (CR2025). Insert something narrow like a paperclip into the hole and pull out the battery tray.
-
Page 28: Appendix
In this case, “RESUMING” is displayed without displaying a folder name, etc. Changing the browse item will display a correct title, etc. • You cannot operate iPod if “KENWOOD” or “✓” displayed on iPod. - Page 29 KENWOOD Music Editor. • “KENWOOD Music Editor Lite ver1.0” is available from the following web site: www.kenwood.com/cs/ce/ • For further information on “KENWOOD Music Editor Lite ver1.0”, refer to the site above or the application...
-
Page 30: In Tuner Source
(“VOL OFFSET”) “DISP SELECT” “SETTINGS” “CLOCK” (See in standby) “DISPLAY”(See in standby) “RDS SET” (See in TUNER source) “DEMO MODE” KDC-BT40U/KDC-BT30 In USB/ iPod source* 1st hierarchy 2nd hierarchy “AUDIO CONTROL” (See in CD/ Audio file source) Page (“AUDIO CTRL”) “DISP SELECT”... - Page 31 “NR LEVEL” “EC LEVEL” “CLOCK” (See in standby) “DISPLAY”(See in standby) “DEMO MODE” *KDC-BT40U only (“ ”) encloses a display appearing on the KDC-BT30. It is shown only if it differs from the one appearing on the KDC-BT40U. Page English...
-
Page 32: Accessories/ Installation Procedure
KDC-BT40U/KDC-BT30 be linked with the ignition (i.e., it will not turn on and off along with the ignition). If you want to link the unit’s power with the ignition, connect the ignition wire to a power source that can be turned on and off with the ignition key. -
Page 33: Connecting Wires To Terminals
Switches the preout between rear output (“REAR”) and subwoofer output (“SUB-W”). Refer to “SWITCH PREOUT”/(“SWITCH PRE” ) of <Initial Setting> (page 18). To connect the Kenwood navigation system, consult your MUTE navigation manual. To use the steering wheel remote control feature, you... - Page 34 Gray Gray/Black White White/Black Green Green/Black KDC-BT40U/KDC-BT30 2WARNING Functions Connecting the ISO Connector The pin arrangement for the ISO connectors depends on the type of vehicle you drive. Make sure to make the proper connections to prevent damage to the unit.
-
Page 35: Installation/Removing The Unit
Installation/Removing the Unit Installation Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). -
Page 36: Troubleshooting Guide
☞ Clean the CD, referring to the CD cleaning of the section on <Handling CDs> (page 3). ✔ The disc is severely scratched. ☞ Try another disc instead. KDC-BT40U/KDC-BT30 Audio file source The sound skips when an Audio file is being played. - Page 37 The messages shown below display your systems condition. TOC ERROR: • No disc has been loaded in the disc magazine. • The CD is quite dirty. The CD is upside- down. The CD is scratched a lot. ERROR 05: The disc is unreadable. ERROR 77: The unit is malfunctioning for some reason.
-
Page 38: Specifications
The preset content may not be recalled depending on the selected band. NO VOICE: No call. KDC-BT40U/KDC-BT30 Specifi cations FM Tuner Section Frequency Range (50 kHz Space) : 87.5 MHz – 108.0 MHz Usable Sensitivity (S/N = 26dB) : 1.0 μV/75 Ω... -
Page 39: Bluetooth Section
• The “AAC” logo is a trademark of Dolby Laboratories. • The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood Corporation is under license. Other trademarks and trade names are those of their respective owners. - Page 40 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Slovensko S tem Kenwood izjavlja, da je ta KDC-BT40U/KDC-BT30 v skladu z osnovnimi zahtevami in ostalimi ustreznimi predpisi Direktive 1999/5/EC. Slovensky Spoločnosť Kenwood týmto vyhlasuje, že KDC-BT40U/KDC-BT30 spĺňa zákldné...