Channel Level Fine Adjustments - Kenwood KDC-X8019BT Instruction Manual

5
Set the value
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
The settings of the delay time are automatically
identified and compensated by specifying the
distances of each speaker from the center of the
vehicle interior.
1 S et the front and rear positions and the height
of the reference point to the position of the ears
of the person sitting in the front seat, and set
the right and left positions to the center of the
vehicle interior.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the distance difference in accordance
with the farthest speaker.
Reference point
FRONT
REAR
When Speaker network is set to 3 way
Reference point
TWEETER
MID RANGE
6
Exit Audio Control mode
Press the [MENU] button for at least 1 second.
FRONT
REAR
SUB-W
TWEETER
MID RANGE
WOOFER

Channel Level Fine Adjustments

After DTA compensation, you can finely adjust
the unsatisfactory speaker volume of respective
speaker.
Display Item
"FRONT" Front speaker
"REAR" Rear speaker
"SW" Subwoofer
When Speaker network is set to 3 way
Display Item
"TWEETER" Tweeter speaker
"MID RANGE" Mid Range speaker
"WOOFER" Woofer
1
Select the source
Pressing the [SRC] button repeatedly switches
source.
Select a source other than "STANDBY".
✍ SRC Select mode 2: Press the [SRC] button and
then turn the [VOL] knob. To determine the
selected source, press the [VOL] knob.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Enter Channel Level setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "Pro Setup"
Level.
4
Select the speaker you want to set
Turn the [VOL] knob and press it when the
desired value is displayed.
Item Setting overview
"CHANNEL LEVEL. Front Left speaker
FRONT" / "L"
"CHANNEL LEVEL. Front Right speaker
FRONT" / "R"
"CHANNEL LEVEL. Rear Left speaker
REAR" / "L"
"CHANNEL LEVEL. Rear Right speaker
REAR" / "R"
"CHANNEL LEVEL. Subwoofer Left
SW" / "L"
"CHANNEL LEVEL. Subwoofer Right
SW / "R"
Range
"–8" — "0"
"–8" — "0"
"–8" — "0"
( : Factory setting)
Range
"–8" — "0"
"–8" — "0"
"–8" — "0"
( : Factory setting)
> >
"DTA Setting" "Channel
Next page 3
English
41
|