Turning The System On (Arming); To Turn Your Security System On (Arm) - Bosch Security System User Manual

Turning the System On (Arming)

Your security system can be turned on (armed) in many
different ways, depending on the arming command used.
Arming Commands are those commands used to turn the
system on. The most basic arming command is to arm the
entire system. The simplest way to arm your system is to enter
your personal passcode or COMMAND 1.
There are several other arming commands to turn the system
on. These are described later in this manual.

To Turn Your Security System On (Arm)

1. Enter your passcode and press
ENTER
.
2. After you arm your system, the keypad emits a repeating
beep tone,
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - Turning the System On (Arming)
displays Area # Area Text is
now arming... followed by
Exit now! # seconds remaining
and counts down the exit delay
time.
28