Viewing Fire Trouble And Fire Supervisory Conditions; Non-Fire Point Trouble And Supervisory Events; Silencing Non-Fire Trouble And Supervisory Events - Bosch Security System User Manual

Security System | User's Guide | Part I: Security System Basics - Non-Fire Point Trouble and Supervisory Events
Some fire points, when activated, will display
FIRE TROUBLE for a preset amount of time. If no
other fire activity is detected, this condition will
automatically clear. If the condition remains or
another fire detector is tripped, a fire alarm will
occur.

Viewing Fire Trouble and Fire Supervisory Conditions

After pressing COMMAND 4 or Silence> soft key, Fire
Trouble continues to automatically scroll through the display.
To view the faulted fire points, press any numeric key, then
press Next> to scroll these displays manually if you wish.
Events scroll from oldest to newest.
Bosch Security Systems | 9/04 | 4998122475D

Non-Fire Point Trouble and Supervisory Events

When a trouble event occurs, your keypad may be
programmed to emit three warble tones, then a pause
(repeatedly).
If the system was armed, the keypad display shows the
number of non-fire trouble events or non-fire supervisory
events and then custom text for each activated point.

Silencing Non-Fire Trouble and Supervisory Events

Pressing COMMAND 4 or the Silence> soft key silences and
clears Trouble and/or non-fire Supervisory conditions. In
addition to this, entering a personal passcode with the proper
authority level silences a trouble and disarms the control panel
if it was armed. If you wish to review these cleared troubles,
using COMMAND 40 can do this.
20