Master Arm ? (Command + 1); Description; Using Master Arm - Bosch Security System User Manual

Hide thumbs Also See for Security System:

Table of Contents

MASTER ARM ? (COMMAND + 1)

Use this function to turn on the entire system, both perimeter

and interior. When you turn the system on, the display shows

how many seconds of exit delay time you have to exit the

protected area. You should leave before exit delay time

expires.

Leaving after exit delay has expired will cause the entry delay

to start only if the person exits through a point set for

Entry/Exit delay. Exiting through any other point should

cause an immediate alarm. You may also cause an alarm on

an interior device. Enter your personal passcode to disarm the

system.

Your cleaning service, a serviceman, or others may also use

this function to turn on your system when they leave.

Bosch Security Systems | 9/04 | 4998122475D

Security System | User's Guide | Part II: System Commands - MASTER ARM ? (COMMAND + 1)

Using the COMMAND +1 shortcut will only arm

the area where the keypad has been assigned.

For example, if the keypad is assigned to Area 1,

only Area 1 will be armed when COMMAND + 1

is pressed.

1. The display shows disarmed

idle text.

2. Press the

COMMAND

3. The display shows *System

Command*.

key.

Table of Contents

Show Quick Links

Table of Contents