Bypass A Point? (Command + 0); Description; Using Bypass A Point - Bosch Security System User Manual

BYPASS A POINT? (COMMAND + 0)

Description

Bypass points that you do not want included in the system.
Points that are not included in the system do not detect
intruders and cannot send any reports. You can bypass points
when an area is disarmed. Bypassing a point reduces the level
of security and should be used with discretion. Points remain
bypassed until you unbypass them or some points may return
when the area is disarmed (refer to UNBYPASS A POINT?
(COMMAND + 0 + 0) on page 60).
You could use COMMAND 0 to leave a window open over
night without initiating an alarm (refer to Turning the System On
(Arming) With Doors or Windows Open on page 31).
Bosch Security Systems | 9/04 | 4998122475D
Security System | User's Guide | Part II: System Commands - BYPASS A POINT? (COMMAND + 0)

Using Bypass a Point

1. Ensure your keypad shows idle
disarmed text.
COMMAND
2. Press the
3. The display shows *System
Command*.
0
4. Press the key.
key.
57