Bypass A Point? (Command + 0) - Bosch Security System User Manual

BYPASS A POINT? (COMMAND + 0)

Description
Bypass points that you do not want included in the
system. Points that are not included in the system do
not detect intruders and cannot send any reports. You
can bypass points when an area is disarmed. Bypassing a
point reduces the level of security and should be used
with discretion. Points remain bypassed until you
unbypass them or some points may return when the
area is disarmed. See Unbypassing a Point (COMMAND
00).
You could use COMMAND 0 to leave a window open
over night without initiating an alarm. Also see Turning
the System On With Doors or Windows Open.
4998122475C
BYPASS A POINT? (COMMAND + 0)
Using Bypass a Point
1. Ensure your
command center
shows idle
disarmed text.
2. Press the COMMAND key.
The display shows
*System
Command*.
3. Press the 0 key.
Security System User's Guide
Part II: System Commands