View Memory ? (Command + 4 + 0) - Bosch Security System User Manual

VIEW MEMORY ? (COMMAND + 4 + 0)

View Event Memory
Description
Your system stores events that occurred since the last
time display was cleared. Use COMMAND 40 to view
Event Memory.
Event Memory allows you or a service technician to
review events after they are cleared from the command
center's display. *Alarm Silenced* will continue to
scroll to remind you that events are stored in Event
Memory.
Each time you turn the system on, the Event Memory is
erased and the *Alarm Silenced* message is cleared.
4998122475C
VIEW MEMORY ? (COMMAND + 4 + 0)
Using View Memory:
1. Ensure your
command center
shows idle
disarmed text.
Press the COMMAND key.
2.
3. The display
shows *System
Command*.
4. Press the 4 key,
followed by the 0 key.
Security System User's Guide
Part II: System Commands
+