Bosch Security System User Manual page 72

Part II: System Commands
UNBYPASS A POINT? (COMMAND + 0 + 0)
If you don't know the number of the point you
wish to unbypass, you can view the list of devices
that can be bypassed by pressing the Next> key.
Continuously pressing Next>
scrolls through these devices.
When the point text of the point you wish to
unbypass appears,
press the Unbypass>
soft key or the ENTER
button.
5. One of the following messages displays (FRONT
DOOR is used as an example here):
FRONT DOOR is not bypassed indicates the point
is in the system, and therefore cannot be
bypassed.
FRONT DOOR is bypassed. indicates that the
point has already been bypassed.
If the Unbypass> is selected, FRONT DOOR is
now unbypassed displays and indicates the point
was successfully unbypassed.
Security System User's Guide
If a 24 hour or Fire Point is bypassed and you
attempt to unbypass it when it is still faulted,
Cannot unbypass 24hr faulted points will be
displayed.
Invalid Point indicates that the device is not
assigned to the area that you are in, or the number
that was entered was not a valid point in the
system.
No Additional Points indicates that there are no
points remaining to be unbypassed. (The display
will exit the function and return to idle text.)
You can return to idle text by pressing <Exit.
6.
4998122475C