Certificates - Multitech FF240-IP User Manual

Ip fax server
Hide thumbs Also See for FF240-IP:
Table of Contents

Advertisement

Certificates

A site certificate is needed for a browser to allow access to the FF240-IP unit. This certificate is self-
signed, so your browser will likely show a security warning (which simply means the certificate is not
authenticated by a third party) before you can continue. Use this page to replace the default certificate
with the one that contains details specific to your installation. These values are for identification
purposes only. Creating a new certificate will require a reboot of the FF240-IP. A pop-up will warn of this
and allow you to cancel the changes if necessary.
After generating a new certificate, you may have to make an allowance in your web browser to log back
in to the FF240-IP unit. Browsers will not allow access without a valid certificate and the FF240-IP does
have a valid certificate, but it is self-signed (i.e. no third party verification), so your browser displays a
warning about this. You may safely continue (Internet Explorer), or in the case of Firefox, temporarily
add the FF240-IP certificate to the exception list. Details on how to add to an exception list can be found
in Chapter 2.
Generate Server Certificate
Common Name
Enter the common name associated with the certificate. This should be set to the Hostname or
IP address, depending on which you will use when connecting to the FF240-IP. A web browser
will use this field to check for a valid certificate. No more than 64 characters are allowed.
Days
Enter the number of days that the certificate is valid. No more than 3 digits are allowed.
Country
Enter the country that the certificate is valid for using in, using its two letter code. A search for
"country codes" at www.iso.org will give you a list if needed. The code US is for the United
States.
State/Province
Enter the state or province that the certificate is valid for. No more than 64 characters are
allowed.
Locality/City
Enter the city or locality that the certificate is valid for. No more than 64 characters are allowed.
Organization
Enter the name of the organization that the certificate is valid for. No more than 64 characters
are allowed.
Multi-Tech Systems, Inc.
Chapter 3: Web Management Interface
FF240-IP Admin User Guide
36

Advertisement

Table of Contents
loading

Table of Contents