Mounting; Orientation; Rigging - Chauvet COLORtube User Manual

Mounting

Orientation

The COLORtube™ 3.0 EQ may be mounted in any safe position.

Rigging

Mount the fixture securely. This may be done with a screw, nut and bolt, or a hanging clamp. The hole in each
bracket is 13 mm in size. When rigging consider routine maintenance and DIP switch access. Please see the
following steps for installation.
1.
2.
3.
Mounting
Bracket
COLORtube™ 3.0 EQ User Manual Rev. 3
Attach the bracket (1 or 2) to the mounting point.
Slide the bottom ridge of the tubes into place, as shown in the first diagram below.
Attach the pressure plate by using the bolt and lock washer that are included. This is done with a
#5 Allen wrench.
Step # 2
Step # 3
Pressure
Plate
Bolt and Lock
Washer
Page 9 of 22