Explanation Of Code In Remarks Column - MULTIQUIP WHISPERWATT DCA10SPX4 Operation And Parts Manual

DCA10SPX4/U4 — EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and remarks
used in the Parts section of this manual. Use the help numbers
found on the back page of the manual if there are any questions.
The contents and part numbers listed in the parts section
are subject to change without notice . Multiquip does not
guarantee the availibility of the parts listed.
Sample Parts List:
NO. PART NO. PART NAME
1 12345 BOLT ...................... 1 ...... INCLUDES ITEMS W/
2 WASHER, 1/4 IN. ............. NOT SOLD SEPARATELY
*
2 12347 WASHER, 3/8 IN. ... 1 ...... MQ-45T ONLY
*
3 12348 HOSE ................... A/R ....MAKE LOCALLY
4 12349 BEARING ............... 1 ...... S/N 2345B AND ABOVE
NO. Column
Unique Symbols - All items with same unique symbol
+
( , #, , %, or >) in the number column belong to the
*
same assembly or kit, which is indicated by a note in the
"Remarks" column.
Duplicate Item Numbers - Duplicate numbers indicate
multiple part numbers are in effect for the same general
item, such as different size saw blade guards in use or a
part that has been updated on newer versions of the same
machine.
When ordering a part that has more than one
item number listed, check the remarks column
for help in determining the proper part to order.
PART NO. Column
Numbers Used - Part numbers can be indicated by a
number, a blank entry, or TBD.
TBD (To Be Determined) is generally used to show a part
that has not been assigned a formal part number at time
of publication.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will
be clarified in the "Remarks" Column.
PAGE 44 — DCA10SPX4/DCA10SPXU4 — OPERATION AND PARTS MANUAL — REV. #0 (08/05/09)
QTY. REMARKS
QTY. Column
Numbers Used - Item quantity can be indicated by a
number, a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other
parts that are sold in bulk and cut to length.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the "Remarks"
Column.
REMARKS Column
Some of the most common notes found in the "Remarks"
Column are listed below. Other additional notes needed
*
to describe the item can also be shown.
Assembly/Kit - All items on the parts list with the same
unique symbol will be included when this item is
purchased.
Indicated by:
"INCLUDES ITEMS W/(unique symbol)"
Serial Number Break - Used to list an effective serial
number range where a particular part is used.
Indicated by:
"S/N XXXXX AND BELOW"
"S/N XXXX AND ABOVE"
"S/N XXXX TO S/N XXX"
Specific Model Number Use - Indicates that the part is
used only with the specific model number or model
number variant listed. It can also be used to show a part
is NOT used on a specific model or model number variant.
Indicated by:
"XXXXX ONLY"
"NOT USED ON XXXX"
"Make/Obtain Locally" - Indicates that the part can be
purchased at any hardware shop or made out of available
items. Examples include battery cables, shims, and certain
washers and nuts.
"Not Sold Separately" - Indicates that an item cannot
be purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available
for sale through Multiquip.