Date & Time Set Procedure; Using The Cuff - HoMedics BPA-201 Instruction Book

DATE & TIME SET PROCEDURE
1. T o adjust the date/time, press the Set button
2. The display will show a blinking number showing the
HOUR. Change the HOUR by pressing the
Each press will increase the number by one in a cycling
manner. Press the Set button
the entry, and the screen will show a blinking number
representing the MINUTE.
3. Change the MINUTE, MONTH, DAY and YEAR as
described in Step 2 above, using the
the numbers and the Set button
Pulse
repeat process to set MINUTE,
MONTH, DAY and YEAR
.
button.
again to confirm
button to change
to confirm the entries.
Press the button
blinking HOUR
Pulse
increasing HOUR
confirm the entry
13
USING THE ARM CUFF
Very Important: Proper cuff size is critical to accurate
measurement.
This monitor comes with two sizes of arm cuffs:
Standard Size Fits 9"–13" (23 cm – 33 cm)
Large Size Fits 13"–17" (33 cm – 43 cm)
The appropriate cuff is suitable for your use if the
colored arrow falls within the solid color line as
shown below.
Colored Arrow
MODEL# PP-BPCUFF5
Center tube over
middle of arm
Solid Colored Line
14