Agilent Technologies N5171B Command Reference Manual page 302

Arb Commands
Dmodulation Subsystem–N5172B/82B with Option 431 ([:SOURce]:RADio:DMODulation:ARB)
*RST EPT1
Key Entry Patt Trig In 1
[:STATe]
Supported N5172B/82B with Option 431
[:SOURce]:RADio:DMODulation:ARB[:STATe] ON|OFF|1|0
[:SOURce]:RADio:DMODulation:ARB[:STATe]?
This command enables or disables the digital modulation capability.
ON (1) This choice sets up the internal hardware to generate the currently selected digital
modulation format signal selection.
OFF (0) This choice disables the digital modulation capability.
*RST 0
Digital Modulation Off On
Key Entry
Mode > ARB Custom Modulation > Digital Modulation Off On
Key Path
Remarks When On is selected, the I/Q state is activated and the I/Q source is set to
internal.
272
Patt Trig In 2
Agilent X-Series Signal Generators SCPI Command Reference