Adobe FRAMEMAKER 10 User Manual page 86

<ColorCyan percentage>
<ColorMagenta percentage>
<ColorYellow percentage>
<ColorBlack percentage>
<ColorLibraryFamilyName string>
<ColorLibraryInkName string>
<ColorAttribute keyword>
<ColorTint percentage>
<ColorTintBaseColor string
<ColorOverprint boolean>
>
Usage
In a MIF file, all colors are expressed as a mixture of cyan, magenta, yellow, and black. The
statement identifies a default FrameMaker document color; the default colors are all reserved (specified by the
keyword) and cannot be modified or deleted by the user. A reserved default color can have two
ColorIsReserved
statements, for example:
ColorAttribute
<ColorAttribute ColorIsCyan>
<ColorAttribute ColorIsReserved>
A color tint must be based on an existing color. This has two implications:
• If the base color doesn't exist in the document, black is used as the base color for the tint.
•
The color value statements (values for CMYK, color family, and ink name) are ignored when included in a tint
statement. However, FrameMaker writes out color value statements for a tint, even though they will be ignored. To
modify the color values of a tint, modify the color value statements for the base color used by the tint.
Percentage of cyan ( 0 – 100 )
Percentage of magenta ( –
0 100
Percentage of yellow ( – )
0 100
Percentage of black ( – )
0 100
Color library name
Specifies name of the color library pigment. Older versions of MIF that
use can still be read into MIF 5.5 and later. The
ColorPantoneValue
full ink name must be used.
Identifies a default FrameMaker document color
keyword can be one of:
ColorIsBlack
ColorIsWhite
ColorIsRed
ColorIsGreen
ColorIsBlue
ColorIsCyan
ColorIsMagenta
ColorIsYellow
ColorIsDarkGrey
ColorIsPaleGreen
ColorIsForestGreen
ColorIsRoyalBlue
ColorIsMauve
ColorIsLightSalmon
ColorIsOlive
ColorIsSalmon
ColorIsReserved
100% indicates solid color; less than 100% indicates a reduced
percentage of the color
The name of the color from which the tint is derived. If the base color
does not exist in the document, black will be used.
indicates overprint is set for the color;
Yes
End of Color statement
ADOBE FRAMEMAKER 10
)
indicates knockout.
No
ColorAttribute
81
MIF Reference