Adobe FRAMEMAKER 10 User Manual page 280

Size of data in bytes:
Example:
Note:
Specifications of style op codes
This section describes each style op code. Op codes are listed by number and description. The op code number is
shown in parentheses.
Note that these styles remain in place until another style op code resets the style.
Dashed line style (0x06)
Specification by data type:
Description of data:
Size of data in bytes:
Default value:
Example:
Arrow style (0x07)
Specification by data type:
Description of data:
Size of data in bytes:
Default value:
0
FF 00000000
This must be the last op code for a FrameVector graphic.
Short, metric, ... , metric
Number of dash segments (short)
Length of dash segments in points (metric, ..., metric)
Variable
None (solid)
06 0000000A 0002 00080000 00060000
for a dashed line with the following specifications:
number of dash segments = 2
dash segment #1 (line segment) = 8.0 points long
dash segment #2 (gap in dashed line) = 6.0 points long
Byte, byte, byte, byte, metric, metric
Tip angle in degrees (byte — between 5 and 85 degrees)
Base angle in degrees (byte — between 10 and 175 degrees)
Arrow type (byte — 0:stick, 1:hollow, 2:filled)
Scale the arrow? (byte — 0:no, 1:yes)
Length in points (metric)
Scale factor (metric)
12
default arrow style
ADOBE FRAMEMAKER 10 275
MIF Reference