Adobe FRAMEMAKER 10 User Manual page 216

Usage
The
SqueezeHorizontal
class. The values are separated by a space. An example of a squeeze table statement is:
<SqueezeTable
<SqueezeHorizontal
<SqueezeVertical
> # end of SqueezeTable
In the preceding example, the
specifies half squeeze from the right.
SpreadTable statement
The statement defines how to reduce the squeeze that was applied to adjacent characters. There are 25
SpreadTable
statement rows in this table, each corresponding to the 25 character classes, respectively.
There are 26 numeric values in each statement row. The first 25 values correspond to the 25 character classes, respec-
tively. The 26th value corresponds to the beginning or end of a line. These values specify how to spread a character
of the class identified by the row statement, when followed by a character in the class identified by the column
position in the statement.
Syntax
<SpreadTable
<BegParentheses numerals>
<EndParentheses numerals>
<NoLineBeginChar numerals>
<QuestionBang numerals>
<CenteredPunct numerals>
<PeriodComma numerals>
<NonSeparableChar numerals>
<PrecedingSymbol numerals>
<SucceedingSymbol numerals>
<AsianSpace numerals>
<Hiragana numerals>
<Others>
and statements include 25 numerical values, one for each character
SqueezeVertical
1 1 2 0 0 3 2 0 0 0 0 0 0 0 5 0 0 0 1 2 0 0 0 0 0
1 2 0 0 4 2 0 0 0 0 0 0 0 5 0 0 0 1 2 0 0 0 0 0 0
value for a character in the
SqueezeHorizontal
ADOBE FRAMEMAKER 10
class is
NoLineBeginChar
211
MIF Reference
, which
2