Adobe FRAMEMAKER 10 User Manual page 294

Specification of the polyline
The polyline in this example has the following specifications:
•
The arrow style has a tip angle of 16 and a base angle of 120 .
&070000000C1078
• The arrow style is defined so that the arrow is filled and is scaled as it gets wider. The length of the arrow is 12
points. If the line is widened, the arrow head also is widened by a corresponding factor of 0.25.
0201000C00000004000
• The style of the head cap of the polyline is arrow.
&270000000100
• The polyline consists of two points.
&820000001400000002
• The positions of the two points are (114 points, 85 points) and (51 points, 85 points).
00720000005500000033000000550000
The rest of the styles are inherited from previous objects.
Specification of the arc
The arc in this example has the following specifications:
•
The fill pattern of the arc is none (0F).
&22000000010F
•
The style of the head cap of the arc is square.
&270000000103
•
The position of the arc is (4 points, 43 points).
&850000001800040000002B0000
•
The size of the arc is 43 points by 40 points.
002F0000002C0000
•
The start angle of the arc is 90 , and the arc angle length is 90 .
005A0000005A0000
The rest of the styles are inherited from previous objects.
Specification of the end of the FrameVector graphic
The following record specifies the end of the FrameVector graphic:
&FF00000000
The characters specify the end of data in hexadecimal format.
\x
ADOBE FRAMEMAKER 10 289
MIF Reference