Details Of Maintenance Mode Items - Epson Stylus Pro 4000 Reference Manual

Details of maintenance mode items

HEX DUMP
Data received from the host computer can be printed out in
hexadecimal numbers.
To print it out, follow these steps.
1. Make sure that paper is loaded in the printer.
2. In maintenance mode, press the Paper Feed
Feed
3. Press the Menu
button again to start printing.
The print data in the print buffer is printed with 16-byte hex.
data in the left column, and corresponding ASCII characters
in the right column.
Note:
If the last data is less than 16 bytes, it is not printed until you press the
Pause
LANGUAGE
You can select the language to be displayed on the LCD.
To select a suitable language, follow these steps.
1. In maintenance mode, press the Paper Feed
Feed
button.
2. Press the Paper Feed
language.
3. Press the Menu
the READY (or similar word in the language selected) is
displayed on the LCD.
button to display HEX DUMP.
button to display PRINT. Press the Menu
button.
button to display LANGUAGE, and press the Menu
button to set the language. Confirm that
or Paper Feed
Maintenance Mode
or Paper
or Paper
to select a suitable
2
2
2
2
2
2
2
2
2
2
2
2
43