Maintenance Mode; Maintenance Mode Menu Items - Epson AcuLaser CX-11N Repair Manual

Epson AcuLaser CX-11N/AcuLaser CX-11NF Field Repair Guide

Maintenance Mode

Detailed information regarding the Maintenance Mode is located in the AcuLaser CX11/CX11F Service Manual
Chapter 6, Section 6.4.

Maintenance Mode Menu Items

• Engine Status Sheet - prints the counted values of each unit which makes up the printer engine.
• Print Log Report - prints a log file of the pages printed by size, print mode (color or monochrome), and
coverage.
• Reset 2nd BTR Counter
• Reset C Developer Counter
• Reset M Developer Counter
• Reset Y Developer Counter
• Reset K Developer Counter
• Reset Fuser Counter
• Clear Error Log - Clears the Error Log that is printed on the Engine Status Sheet.
• MCU Data Backup - Backs up most of the EEPROM data.
• MCU Data Restore - Restores EEPROM data that was saved via MCU Data Backup.
To enter Maintenance Mode:
1. Depress the Up Arrow
while powering the CX-11 on. Keep the Arrow buttons depressed until
upper left corner of the LCD Panel.
2. Depress the Setup
3. Depress the Right Arrow
4. If Printer Settings
Settings is highlighted.
5. Depress the Right Arrow
6. Depress the Up Arrow
, Down Arrow
button on the Control Panel.
button.
is not highlighted, depress the
button.
or Down Arrow
Printer Component,
, Left Arrow , and Right Arrow
Up Arrow or Down Arrow
button until Maintenance Menu
Software Item, LCD Display, Printer Button
buttons simultaneously
"Maintenance Mode" is displayed in the
button until
is highlighted.
9/9/05
Printer
Page 17.