Removing The Roll Paper From The Spindle - Epson Stylus Pro 4000 Reference Manual

Removing the roll paper from the spindle

To remove the roll paper from the spindle, follow these steps.
1. Place the paper loaded spindle down on a flat surface.
2. Slide the black movable flange off the end of the spindle by
tapping the same end of the spindle with your hand to loosen
it. The flange is removed.
c
3. Remove the roll paper from the spindle.
Note:
Store unused roll paper in its original package. Put the roll paper into
the plastic bag, and outer package so as to avoid moisture problems.
Caution:
To remove the black movable flange from the spindle, do not
hold the spindle vertically and tap the end on the floor;
otherwise, damage may occur.
Paper Handling
5
5
5
5
5
5
5
5
5
5
5
5
239