Using Epson Monitor Iv; Accessing Epson Monitor Iv - Epson Stylus Pro 4000 Reference Manual

Data will be sent to the
printer after being stored
on your disk
Check for errors before
starting to print.
Check the ink level
before starting to print.

Using EPSON Monitor IV

After you send a print job to the printer, you can use the EPSON
Monitor IV utility to check, cancel, or change the priority of print
job that are queued for printing. This utility also shows the status
of the job currently being printed.

Accessing EPSON Monitor IV

To access EPSON Monitor IV, follow these steps.
Select this check box to prevent horizontal
banding in your printout. By default, graphics
data is sent by the computer to the printer in
rectangular bands, which prevents the printer
from having to reconstruct an entire data in
memory before printing it. Selecting this check
box will make the computer temporarily store
the data on its hard drive and then send it to
the printer as a whole to prevent banding in
the printed image.
Select this check box if you want to check for
errors before starting to print.
Select this check box if you want to check the
ink level before starting to print.
Printing with Mac OS 8.6 to 9.x
4
4
4
4
4
4
4
4
4
4
4
4
189