Epson Stylus Pro 4000 Reference Manual page 35

2. Press the Menu
3. Press the Paper Feed
HEAD ALIGNMENT, and press the Menu
4. As PAPER THKNS is displayed, press the Menu
5. Press the Paper Feed
STD or paper thickness value between 0.0mm and 1.6mm.When
you want to print on Epson special media, select STD. When
you want to print on non-Epson special media, enter the
thickness value of the paper.
6. Press the Menu
7. Press the Menu
the upper row, and AUTO is displayed on the lower raw on the
LCD.
8. Press the Menu
Feed or Paper Feed
If you are using Epson special media and want to perform
head alignment with all colors, select BI-D ALL.
9. Press the Menu
Head alignment pattern examples (BI-D BLACK):
If you are not satisfied with the printed pattern of the automatic
head alignment, you can perform the head alignment manually.
To perform head alignment manually, follow these steps.
1. Press the Menu
button to enter SelecType mode.
or Paper Feed
or Paper Feed
button to register your value.
button again. ALINGMENT is displayed on
button to select AUTO, and press the Paper
button to select BI-D BLACK.
button, and the printer starts printing.
button to enter SelecType mode.
button to display
button.
button.
button to select
The Control Panel
1
1
1
1
1
1
1
1
1
1
1
1
35