Epson Stylus Pro 4000 Reference Manual page 92

4. Specify the width of the binding margin using the Binding
Margin text box. You can specify any width from 3 mm to 30
mm.
Note:
The actual binding margin may vary from the specified settings
depending on your application. Experiment with a few sheets to
examine actual results prior to printing the entire job.
5. Click OK to return to the Layout menu, then click OK to save
your settings.
6. Make sure paper is loaded, and send the print job from your
application. Instructions for generating the even-numbered
pages will be displayed while the odd-numbered pages are
output.
7. Follow the on-screen instructions for reloading the paper.
Note:
❏ The paper may curl during printing due to the amount of ink
used. Should this occur, slightly curl the sheets in the opposite
direction prior to reloading them into the printer.
❏ Align the sheet stack by tapping its edges against a hard, flat
surface prior to reloading the stack into the printer.
❏ Follow the instructions provided when reloading the printouts.
Paper jams or improperly placed binding margins may occur if
the printouts are not reloaded correctly.
❏ In the event of a paper jam, see "Clearing Paper Jams" on page
316.
8. Once the paper is reloaded, click Resume to print the
even-numbered pages.
92
Printing with Windows