Removing The Roll Paper From The Spindle - Epson Stylus Pro 7500 Reference Manual

4. Slide the movable flange (removed in step 1) onto the spindle
until it fixes into place in the end of the roll paper.

Removing the roll paper from the spindle

To remove the roll paper from the spindle, follow the steps below.
1. Place the paper loaded spindle down on a flat surface.
2. Slide the movable flange off the end of the spindle.
c
3. Remove the roll paper from the spindle.
4. Attach a new roll paper to the spindle (see "Attaching the roll
paper to the spindle" on page 4-3), or slide the movable flange
back onto the spindle.
4-4
Paper Handling
Caution:
When removing the movable flange from the spindle, do not
hold the spindle vertically and tap the end on the floor. Doing
so could damage the spindle.