39. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the lower hole in the Adjustable Pulley
Plates (23) with a 3/8Ó x 2Ó Bolt (54) and a 3/8Ó Nylon
Locknut (50). Make sure the Cable Trap is oriented
as shown.
40. Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley to the weld-
ed bracket on the Butterfly Base (4) with a 3/8Ó x
1 3/4Ó Bolt (57) and a 3/8Ó Nylon Locknut (50).
41. Note: For clarity, the weight stack is not shown.
Wrap the Low Cable (75) around a 3 1/2Ó Pulley (24)
in the direction shown. Attach the Pulley and a Cable
Trap (25) to the welded bracket on the Weight Base
(5) with a 3/8Ó x 2Ó Bolt (54) and a 3/8Ó Nylon Locknut
(50). Make sure the Cable Trap is oriented as
shown.
39
50
40
Welded
Bracket
4
41
75
5
18
54
23
25
24
75
75
57
24
50
54
24
25
Welded
Bracket
50