Table of Contents
Advertisement
MAN-DEH-P7900UB-GB.fm Page 27 Wednesday, February 21, 2007 11:20 AM
Operating this unit
Setting the clock
Use these instructions to set the clock.
1. Use MULTI-CONTROL to select Clock.
2. Push MULTI-CONTROL left or right to select the segment of the clock display
you wish to set.
Pushing MULTI-CONTROL left or right will select one segment of the clock display:
Hour – Minute
As you select segments of the clock display the segment selected will blink.
3. Push MULTI-CONTROL up or down to put a clock right.
Notes
• You can match the clock to a time signal by pressing MULTI-CONTROL.
– If the minute is 00 to 29, the minutes are rounded down. (e.g., 10:18 becomes 10:00.)
– If the minute is 30 to 59, the minutes are rounded up. (e.g., 10:36 becomes 11:00.)
Turning the off clock display on or off
If the off clock display is turned on, when the sources and the feature demo are off, the
clock display appears on the display.
1. Use MULTI-CONTROL to select Off clock.
2. Press MULTI-CONTROL to turn the off clock display on.
• To turn the off clock display off, press MULTI-CONTROL again.
Setting the FM tuning step
Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100 kHz. It may be preferable to set the
tuning step to 50 kHz when AF is on.
1. Use MULTI-CONTROL to select FM step.
2. Press MULTI-CONTROL to select the FM tuning step.
Pressing MULTI-CONTROL repeatedly will switch the FM tuning step between 50 kHz
and 100 kHz while AF or TA is on. The selected FM tuning step will appear in the
display.
Note
• The tuning step remains at 50 kHz during manual tuning.
Switching Auto PI Seek
The unit can automatically search for a different station with the same programming,
even during preset recall.
1. Use MULTI-CONTROL to select Auto PI.
2. Press MULTI-CONTROL to turn Auto PI seek on.
• To turn Auto PI seek off, press MULTI-CONTROL again.
Switching the warning tone
If the front panel is not detached from the head unit within four seconds of turning off
the ignition, a warning tone will sound. You can turn off the warning tone.
1. Use MULTI-CONTROL to select Warning tone.
2. Press MULTI-CONTROL to turn warning tone on.
• To turn warning tone off, press MULTI-CONTROL again.
Switching the face auto open
To protect against theft, this unit features detachable front panel. To detach the front
panel easily, the front panel opens automatically. This function is on as a default.
1. Use MULTI-CONTROL to select Face auto open.
2. Press MULTI-CONTROL to turn the face auto open on.
• To turn the face auto open off, press MULTI-CONTROL again.
Switching the auxiliary setting
Auxiliary equipments connected to this unit can be activated individually. Set each
AUX source to ON when using. About connecting or using auxiliary equipments, refer
to "Using the AUX source" on page 29.
1. Use MULTI-CONTROL to select AUX1/AUX2.
2. Press MULTI-CONTROL to turn AUX1/AUX2 on.
• To turn AUX off, press MULTI-CONTROL again.
27
Advertisement
Table of Contents
