Table of Contents
Advertisement
MAN-DEH-P7900UB-GB.fm Page 14 Wednesday, February 21, 2007 11:20 AM
Operating this unit
Receiving traffic announcements
TA (traffic announcement standby) lets you receive traffic announcements
automatically, no matter what source you are listening to. TA can be activated for both
a TP station (a station that broadcasts traffic information) or an enhanced other
network's TP station (a station carrying information which cross-references TP
stations).
1. Tune in a TP or enhanced other network's TP station.
The TP (
) indicator will light.
2. Press TA/NEWS to turn traffic announcement standby on.
• To turn traffic announcements standby off, press TA/NEWS again.
3. Use MULTI-CONTROL to adjust the TA volume when a traffic announcement
begins.
The newly set volume is stored in memory and recalled for subsequent traffic
announcements.
4. Press TA/NEWS while a traffic announcement is being received to cancel the
announcement.
The tuner returns to the original source but remains in the standby mode until TA/
NEWS is pressed again.
Notes
• You can also turn the TA function on or off in the menu that appears by using MULTI-
CONTROL.
• The system switches back to the original source following traffic announcement reception.
• Only TP and enhanced other network's TP stations are tuned in during seek tuning or BSM
when TA is on.
Using PTY functions
You can tune in a station by using PTY (program type) information.
Searching for an RDS station by PTY information
You can search for general types of broadcasting programs, such as those listed on
page 15.
1. Use MULTI-CONTROL to select PTY search in the function menu.
2. Push MULTI-CONTROL left or right to select a program type.
News&Inf – Popular – Classics – Others
3. Press MULTI-CONTROL to begin the search.
The unit searches for a station broadcasting that program type. When a station is
found its program service name is displayed.
PTY (program type ID code) information is listed on page 15.
• To cancel the search, press MULTI-CONTROL again.
• The program of some stations may differ from that indicated by the transmitted PTY.
• If no station is broadcasting the type of program you searched for, Not found is
displayed for about two seconds and then the tuner returns to the original station.
Using news program interruption
When a news program is broadcast from a PTY code news station, the unit can switch
from any station to the news broadcast station. When the news program ends,
reception of the previous program resumes.
* Press TA/NEWS and hold to turn on news program interruption.
Press TA/NEWS until NEWS ON appears in the display.
• To turn off news program interruption, press TA/NEWS and hold until OFF appears
in the display.
• A news program can be canceled by pressing TA/NEWS.
Note
• You can also turn on or off news program in the menu that appears by using MULTI-
CONTROL.
Receiving PTY alarm broadcasts
When the emergency PTY code broadcasts, the unit receives it automatically (ALARM
appears). When the broadcasting ends, the system returns to the previous source.
• An emergency announcement can be canceled by pressing TA/NEWS.
14
Advertisement
Table of Contents
