Playing All Songs In A Random; Pausing A Song; Changing Audiobook Speed; Order (Shuffle All) - Pioneer DEH-P7900UB Operation Manual

MAN-DEH-P7900UB-GB.fm Page 23 Wednesday, February 21, 2007 11:20 AM
Operating this unit
Playing all songs in a random order (shuffle all)
This method plays all songs on the iPod randomly.
1. Use MULTI-CONTROL to select Shuffle all in the function menu.
2. Press MULTI-CONTROL to turn shuffle all on.
Press MULTI-CONTROL repeatedly until the desired setting appears in the display.
All songs on the iPod will play randomly.
• Pressing and holding MULTI-CONTROL during the normal playback display can
also control this function.

Pausing a song

1. Use MULTI-CONTROL to select Pause in the function menu.
2. Press MULTI-CONTROL to turn pause on.
Playback of the current song pauses.
• To turn pause off, press MULTI-CONTROL again.

Changing audiobook speed

While listening to an audiobook on iPod, playback speed can be changed.
1. Use MULTI-CONTROL to select Audiobooks in the function menu.
2. Press MULTI-CONTROL to select your favorite setting.
Press MULTI-CONTROL repeatedly until the desired setting appears in the display.
• Faster – Playback faster than normal speed
• Normal – Playback in normal speed
• Slower – Playback slower than normal speed

Audio Adjustments

Introduction of audio adjustments

Audio display
Shows the audio adjustment status.
1. Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and
ENTERTAINMENT appear on the display.
2. Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option; press to select.
The audio function name appears on the display.
3. Turn MULTI-CONTROL to select the audio function.
Turn MULTI-CONTROL to switch between the audio functions in the following order:
Fader (balance adjustment) – Powerful (graphic equalizer adjustment) – 50Hz (7-
band graphic equalizer adjustment) – LOUD (loudness) – Sub W.1 (subwoofer on/off
setting) – Sub W.2 (subwoofer setting) – Bass (bass boost) – HPF (high pass filter) –
SLA (source level adjustment) – ASL (automatic sound levelizer)
• You can also select the audio function by pressing AUDIO on the remote control.
• You can select the Sub W.2 only when subwoofer output is turned on in Sub W.1.
• When selecting the FM tuner as the source, you cannot switch to SLA.
• To return to the display of each source, press BAND.
• If you do not operate functions except for 50Hz within about 30 seconds, the display
is automatically returned to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening
environment in all occupied seats.
1. Use MULTI-CONTROL to select Fader.
• If the balance setting has been previously adjusted, Balance will be displayed.
2. Push MULTI-CONTROL up or down to adjust front/rear speaker balance.
Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance
moves towards the front or rear.
F 15 to R 15 is displayed as the front/rear speaker balance moves from front to rear.
23