Adding Engine Oil - KTM 125 DUKE EU Owner's Manual

17 SERVICE WORK ON THE ENGINE
17.3

Adding engine oil

Info
Too little engine oil or poor-quality engine oil results in premature wear to the engine.
–
Remove the oil filler plug
engine oil.
Engine oil
After oil change
approx.
B00773-11
–
Install and tighten the oil filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may result in
unconsciousness and/or death.
–
–
Start the engine and check that it is oil-tight.
Finishing work
–
Fit the front spoiler. (
–
Check the engine oil level. (
with the O-ring from the clutch cover and fill up with
7
1.2 l (1.3 qt.)
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
p. 91)
p. 144)
External temper- Engine oil
ature: 0... 50 °C (SAE 15W/50)
(32... 122 °F) ( p. 172)
External tempera- Engine oil
ture: −10... 40 °C
(SAE 10W/40)
(14... 104 °F) ( p. 172)
147