17
SERVICE WORK ON THE ENGINE
Info
Drain the engine oil only when the engine is warm.
Preparatory work
–
Remove the front spoiler. (
–
Stand the motorcycle on its side stand on a horizontal surface.
Main work
–
Place a suitable container under the engine.
–
Remove the oil drain plug
–
Remove oil screen
–
Completely drain the engine oil.
–
Clean the oil drain plug and oil screen thoroughly.
–
Position oil screen
Guideline
B00774-10
Oil drain plug (125 Duke)
Oil drain plug (200 Duke EU/MAL)
p. 90)
with the O-ring.
1
with the O-ring.
2
and mount and tighten oil drain plug
2
M24x1.5
M24x1.5
145
with the O-ring.
1
15 Nm
(11.1 lbf ft)
15 Nm
(11.1 lbf ft)