Installing Exhaust Pipe; Connecting To Weld Output Terminals - Miller Electric Trailblazer Pro 350 Owner's Manual

4-5. Installing Exhaust Pipe

4-6. Connecting To Weld Output Terminals

2 3
.
Point exhaust pipe in desired
direction but always away from
front panel and direction of
travel.
Tools Needed:
1/2 in
802 173-C / Ref. 203 031-A
Y Do not connect to CC and CV
terminals at the same time.
1 Work Weld Output Terminal
2 CC (Stick/TIG) Weld Output
Terminal
3 CV (MIG) Weld Output
Terminal
For MIG welding, connect work
cable to Work terminal and wire
feeder cable to CV (MIG) terminal.
For Stick/TIG welding, connect
work cable to Work terminal and
electrode holder cable to CC (Stick/
TIG) terminal.
1
802 580-A / 203 031-A
OM-4401 Page 17